AP3155 UV Adhesion Promoter, Liter Bottle

AP3155 UV Adhesion Promoter / Anti-static / Cleaner for hard to print surfaces: glass, aluminum, acrylic and metal, liter bottle

AP3155™ Application Instructions for UV sand LED Curable Inks:

1. Wear protective gear, including Latex or Nitrile gloves and safety glasses, when applying AP3155.
2. Use in a well ventilated space.
3. Apply AP3155 to the substrate with a clean, white, lint free wipe or microfiber cloth saturated with the promoter, covering the full surface and insuring no voids.
4. Using a clean, dry, white lint free wipe or microfiber cloth, wipe off AP3155, leaving a thin layer of promoter on the substrate (the substrate will feel slippery).
5. Load the AP3155 prepared substrate into the printer and print image using UV or LED curable ink.
6. AP3155 will cure with the ink when flashed by the UV or LED lamp.

AP3155™ Paint Gun Application for UV Curable Inks:

1. Use Nitrile or Latex gloves and safety glasses when applying AP3155
2. Use in a well ventilated space.
3. Mix AP3155 with Acetone with a 50/50 ratio.
4. Spray AP3155 onto the substrate with a metal spray gun. Make sure to apply a thin even layer of adhesion promoter and use a fine tip nozzle with the sprayer.
5. Load the AP3155 prepared substrate into printer and print image using UV curable ink.
6. AP3155 will cure with the ink when flashed by the UV lamp.

AP3155™ Glass Special Instructions:

1. Only print on the tin or float side when printing on glass.
2. To confirm the float or tin side, illuminate the glass with a black light; the float or tin side of the glass will glow.
3. Shelf Life: One year from date of manufacture.