A 6.0 mil matte white wall vinyl with a clear high-tack removable adhesive. It holds on smooth painted drywall and on harder surfaces that defeat a low-tack wall adhesive, including glass, tile, sealed concrete and factory painted metal, and it still comes off cleanly for up to one year. The difference between this roll and the standard removable version is the adhesive: solvent acrylic with a stronger grip, rated for three years outdoors as well as five indoors.
Specifications
| Thickness | 6.0 mil |
|---|---|
| Film | White Polymeric vinyl |
| Finish | Matte |
| Color | White |
| Opacity | 98% |
| Adhesive | Clear solvent acrylic, high-tack removable |
| Liner | 90# white PE-coated kraft, tight release |
| Outdoor durability | 3 years outdoor; 5 years indoor |
| Print compatibility | Solvent, eco-solvent, latex, UV, UV screen, UV offset |
| Application temperature | 40 F and above |
| Service temperature | -40 to 200 F |
| Roll sizes | 15, 20, 24, 30 and 54 in x 100 ft |
Applications
Wall graphics, decals and murals, point of purchase and retail displays, general signage, and die-cut or flatbed-cut shapes. It runs indoors and outdoors for short and long-term work on smooth painted interior walls (flat, semi-gloss or gloss paint), glass, tile, factory painted metal, sealed concrete and most low surface energy plastics. It is not a rough-surface film; for brick, block or stucco use the rough-surface wall vinyl instead.
Working with it
Apply dry. Full-bleed printing works with minimal shrinkage. Butt seams are preferred; if you overlap, keep it to 1/2 to 1 in. Test adhesion on the actual wall before a full install, since paint and surface condition vary. The liner has a tight release, so it stays put through die cutting and weeding. Shelf life is one year at 70 F and 50 percent relative humidity.
